# No shared cipher

**URL:** <https://community.letsencrypt.org/t/no-shared-cipher/97099>\
**Category:** Help\
**Created:** [July 3, 2019, 9:25am UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099 "2019-07-03T09:25:13Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![scitari](https://avatars.discourse-cdn.com/v4/letter/s/a9a28c/32.png) [@scitari](https://community.letsencrypt.org/u/scitari)\
**Post date:** [July 3, 2019, 9:25am UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/1 "2019-07-03T09:25:13Z")

</div>

Sorry guys for bothering you with an "old" problem, but after googeling and trying various suggestions I found for similar issues, I am really lost and need help.

I had created a **letsencrypt certificate to be used by apache2 and postfix/dovecot on the same machine**.

I am experiencing no issues with webserver SSL connection, seems to run smoothly and without obvious troubles. **-\> cert runs fine with Apache2**

I also have no issue with Roundcube locally accessing IMAP folders or receiving/sending mails by the postfix/dovecot setup. **-\> mailserver runs fine**  
(including no issues with accessing fully functional Roundcube on webserver remotely)

But ... **if a mail client trys to remotely access dovecot IMAP, it gets idle** , cancelling connection sooner or later, and **dovecot is showing this error message**...

> imap-login: Disconnected (no auth attempts in 0 secs): user=\<\>, rip=46.5.145.24, lip=, TLS handshaking: SSL\_accept() failed: error:1417A0C1:SSL routines:tls\_post\_process\_client\_hello:no shared cipher, session=...

I am working mainly with Thunderbird, but **don't think that this is a Thundebird issue** , as other email clients from the smartphone and the tablet are also not able to connect and sync IMAP.

I have already tried ...

- switching off apparmor -\> no change
- checked postfix's main.cf (see full version further below, selection copy&paste:)

> smtpd\_use\_tls = yes  
> smtpd\_tls\_cert\_file = /etc/letsencrypt/live/huis.selfhost.eu/fullchain.pem  
> smtpd\_tls\_key\_file = /etc/letsencrypt/live/huis.selfhost.eu/privkey.pem  
> smtpd\_tls\_loglevel = 1  
> smtpd\_tls\_mandatory\_protocols =  
> smtpd\_tls\_protocols =  
> smtpd\_sasl\_type = dovecot  
> smtpd\_sasl\_path = private/auth  
> smtpd\_sasl\_auth\_enable = yes  
> smtpd\_tls\_security\_level = may  
> smtpd\_tls\_auth\_only = yes  
> smtp\_use\_tls = yes

- checked dovecot's 10-ssl.conf shows (copy&paste:)

> ssl = required  
> ssl\_protocols = TLSv1.2 TLSv1.1 TLSv1  
> ssl\_cert = \</etc/letsencrypt/live/huis.selfhost.eu/fullchain.pem  
> ssl\_key = \</etc/letsencrypt/live/huis.selfhost.eu/privkey.pem

- limiting to TLS1.x -\> no change
- different sets of ciphers (currently 'ssl\_cipher\_list = ALL:!LOW:!SSLv2:!EXP:!aNULL:!RC4::!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS')
- tried 'ssl\_prefer\_server\_ciphers = yes' in 10-ssl.conf
- tried 'smtpd\_tls\_mandatory\_ciphers = medium' in main.cf
- tried 'smtpd\_tls\_mandatory\_protocols = TLSv1.2 TLSv1.1 TLSv1 !SSLv3' in main.cf
- tried 'smtpd\_tls\_protocols=!SSLv2 !SSLv3 !TLSv1' in main.cf

`cd /etc/letsencrypt/live/huis.selfhost.eu | openssl verify chain.pem`

> chain.pem: OK

`openssl verify -untrusted chain.pem cert.pem`

> chain.pem: OK

`openssl x509 -in cert.pem -noout -issuer`

> issuer=C = US, O = Let's Encrypt, CN = Let's Encrypt Authority X3

`openssl x509 -noout -text -in /etc/letsencrypt/live/huis.selfhost.eu/fullchain.pem`

> Certificate:  
> Data:  
> Version: 3 (0x2)  
> Serial Number:  
> 03:45:02:06:a3:52:89:ff:b6:f0:3b:8c:f2:e1:0a:2e:f8:a8  
> Signature Algorithm: sha256WithRSAEncryption  
> Issuer: C = US, O = Let's Encrypt, CN = Let's Encrypt Authority X3  
> Validity  
> Not Before: Jun 20 21:46:14 2019 GMT  
> Not After : Sep 18 21:46:14 2019 GMT  
> Subject: CN = huis.selfhost.eu  
> Subject Public Key Info:  
> Public Key Algorithm: rsaEncryption  
> RSA Public-Key: (2048 bit)  
> Modulus:  
> 00:e4:b2:63:a3:37:18:d4:25:ef:27:a8:df:7c:fe:  
> e5:d2:af:1a:dd:1d:72:8e:9d:ea:ce:d5:5a:ad:c6:  
> 6d:c4:22:05:08:ae:87:c4:7a:88:02:58:62:94:e3:  
> f0:e4:94:2e:ac:78:0d:49:aa:6a:02:09:08:8a:8e:  
> 34:e4:f1:1b:7d:d7:84:b2:a1:f0:5c:16:73:01:08:  
> d3:6a:a1:a0:41:f8:b0:de:02:be:57:38:98:bf:6f:  
> eb:62:bd:d3:e9:83:64:5a:0c:c9:ba:b7:90:d5:f4:  
> 9f:3a:31:13:05:ce:3d:15:10:75:40:bb:be:0e:0c:  
> fb:d0:86:2e:89:08:b6:c2:b2:34:eb:6f:fa:ae:83:  
> c2:e5:98:e8:ef:bf:08:d5:50:83:86:bc:95:ed:96:  
> 22:3a:00:6b:6a:1d:6f:8a:e5:de:be:78:ab:f5:dd:  
> 79:d5:9e:d4:9c:e0:a1:be:0b:68:8f:85:e9:55:e8:  
> 56:71:15:98:3a:17:fa:c0:0f:cb:24:28:9a:29:e0:  
> e7:70:12:74:23:20:1f:34:b3:64:a5:20:94:fe:14:  
> 65:a0:05:0e:17:21:fa:6e:50:3f:0b:c4:b9:0b:80:  
> 05:ea:ee:b2:df:23:81:40:fb:fc:84:3e:e7:f3:a4:  
> a2:12:32:11:b9:e2:05:1e:37:5f:c6:1c:09:27:13:  
> e1:cd  
> Exponent: 65537 (0x10001)  
> X509v3 extensions:  
> X509v3 Key Usage: critical  
> Digital Signature, Key Encipherment  
> X509v3 Extended Key Usage:  
> TLS Web Server Authentication, TLS Web Client Authentication  
> X509v3 Basic Constraints: critical  
> CA:FALSE  
> X509v3 Subject Key Identifier:  
> 54:0D:3A:C0:62:7C:69:F5:AF:73:AC:BA:30:B6:31:96:61:09:3E:D6  
> X509v3 Authority Key Identifier:  
> keyid:A8:4A:6A:63:04:7D:DD:BA:E6:D1:39:B7:A6:45:65:EF:F3:A8:EC:A1  
> Authority Information Access:  
> OCSP - URI:[http://ocsp.int-x3.letsencrypt.org](http://ocsp.int-x3.letsencrypt.org)  
> CA Issuers - URI:[http://cert.int-x3.letsencrypt.org/](http://cert.int-x3.letsencrypt.org/)  
> X509v3 Subject Alternative Name:  
> DNS:huis.selfhost.eu  
> X509v3 Certificate Policies:  
> Policy: 2.23.140.1.2.1  
> Policy: 1.3.6.1.4.1.44947.1.1.1  
> CPS: [http://cps.letsencrypt.org](http://cps.letsencrypt.org)  
> CT Precertificate SCTs:  
> Signed Certificate Timestamp:  
> Version : v1 (0x0)  
> Log ID : 74:7E:DA:83:31:AD:33:10:91:21:9C:CE:25:4F:42:70:  
> C2:BF:FD:5E:42:20:08:C6:37:35:79:E6:10:7B:CC:56  
> Timestamp : Jun 20 22:46:14.222 2019 GMT  
> Extensions: none  
> Signature : ecdsa-with-SHA256  
> 30:46:02:21:00:F9:D6:5F:54:0A:58:F5:73:10:33:94:  
> 13:9E:24:9B:0F:3C:51:23:34:CF:01:C3:EC:59:32:87:  
> B2:0B:FB:BD:23:02:21:00:AE:FE:78:DB:53:84:8C:30:  
> B2:BF:CD:2D:7B:CB:FB:4F:C8:37:39:98:AC:0F:AF:28:  
> 74:75:81:E2:0C:62:87:90  
> Signed Certificate Timestamp:  
> Version : v1 (0x0)  
> Log ID : 63:F2:DB:CD:E8:3B:CC:2C:CF:0B:72:84:27:57:6B:33:  
> A4:8D:61:77:8F:BD:75:A6:38:B1:C7:68:54:4B:D8:8D  
> Timestamp : Jun 20 22:46:14.204 2019 GMT  
> Extensions: none  
> Signature : ecdsa-with-SHA256  
> 30:45:02:21:00:AD:CA:D1:E9:64:7A:D7:5A:67:72:44:  
> 82:99:D4:41:D3:E4:FF:CE:35:CA:30:2B:B1:EC:D3:D5:  
> B1:21:7D:F2:08:02:20:2D:24:A7:A0:49:41:9E:70:51:  
> 20:4D:B9:22:12:E6:69:AC:0D:CE:60:57:B1:A7:BA:60:  
> CC:F8:95:31:A1:CC:74  
> Signature Algorithm: sha256WithRSAEncryption  
> 15:74:c4:93:1d:a5:8d:21:ca:8b:58:07:c9:04:db:a9:6b:88:  
> 2a:42:58:a2:8a:61:c2:02:e9:dc:c6:c9:b6:e0:80:f1:87:81:  
> 29:17:49:16:6d:8e:30:36:51:4f:22:ba:ed:ae:64:7a:2d:fd:  
> 99:7b:13:10:bc:b4:8e:26:8a:e9:bd:43:00:3b:b0:64:d6:69:  
> 8c:33:8c:0e:77:68:d3:0c:48:2c:26:bf:20:8e:b6:93:34:ce:  
> b4:6c:71:64:b1:f9:9a:49:8e:7a:58:6c:d8:33:40:ae:a0:e2:  
> 00:a2:f9:20:1e:c7:30:cd:b7:20:1a:ca:b1:37:46:99:ad:ed:  
> 8c:55:4b:04:5c:6f:c2:24:7f:1d:97:e6:d6:c3:9e:a7:5d:17:  
> bc:3f:09:51:05:eb:2d:cd:53:dd:4e:3d:7e:84:16:01:66:06:  
> e5:97:41:4b:0f:d7:2e:78:13:ad:8f:c4:d8:2c:6a:df:eb:3f:  
> be:c5:7a:25:35:3f:b8:5a:22:58:54:ea:e6:a2:e8:0c:b0:06:  
> bc:af:30:d8:5c:6f:2b:c7:57:3b:e2:01:82:43:80:30:48:53:  
> 31:12:4b:6d:50:bd:4c:8c:17:76:45:fd:a9:ea:d3:26:f8:f4:  
> 9f:c3:96:87:e9:d2:ce:4d:91:81:cf:af:7b:0b:28:bb:b3:d4:  
> 5b:6f:c5:2d

My domain is:  
huis.selfhost.eu

I ran this command:  
IMAP sync request by external email client, mainly Thunderbird but also others, from PC, tablet and smartphone

It produced this output:

My web server is (include version):  
apache2

The operating system my web server runs on is (include version):  
Ubuntu 18.04

My hosting provider, if applicable, is:

> **[Webhosting und DynDNS von selfHOST - selfhost](https://selfhost.de/cgi-bin/selfhost)**
>
> selfHOST bietet dynDNS Businesslösungen, Webspace, V Server für Consumer bis Business!

I can login to a root shell on my machine (yes or no, or I don't know):  
yes

I'm using a control panel to manage my site (no, or provide the name and version of the control panel):  
no

The version of my client is (e.g. output of `certbot --version` or `certbot-auto --version` if you're using Certbot):  
certbot 0.31.0

'certbot-auto --version' gives an error message:

> Creating virtual environment...  
> Traceback (most recent call last):  
> File "", line 27, in   
> File "", line 19, in create\_venv  
> File "/usr/lib/python2.7/subprocess.py", line 185, in check\_call  
> retcode = call(\*popenargs, \*\*kwargs)  
> File "/usr/lib/python2.7/subprocess.py", line 172, in call  
> return Popen(\*popenargs, \*\*kwargs).wait()  
> File "/usr/lib/python2.7/subprocess.py", line 394, in **init**  
> errread, errwrite)  
> File "/usr/lib/python2.7/subprocess.py", line 1047, in \_execute\_child  
> raise child\_exception  
> OSError: [Errno 2] No such file or directory

Postfix main.cf:

> myorigin = /etc/mailname
> 
> smtpd\_banner = $myhostname ESMTP  
> biff = no
> 
> append\_dot\_mydomain = no
> 
> readme\_directory = no
> 
> smtpd\_use\_tls = yes  
> smtpd\_tls\_cert\_file = /etc/letsencrypt/live/huis.selfhost.eu/fullchain.pem  
> smtpd\_tls\_key\_file = /etc/letsencrypt/live/huis.selfhost.eu/privkey.pem  
> smtpd\_tls\_loglevel = 1  
> smtpd\_tls\_mandatory\_protocols =  
> smtpd\_tls\_protocols =  
> smtpd\_sasl\_type = dovecot  
> smtpd\_sasl\_path = private/auth  
> smtpd\_sasl\_auth\_enable = yes  
> smtpd\_tls\_security\_level = may  
> smtpd\_tls\_auth\_only = yes
> 
> smtpd\_recipient\_restrictions =  
> permit\_mynetworks,  
> permit\_sasl\_authenticated,  
> reject\_unauth\_destination,  
> reject\_unauth\_pipelining,  
> reject\_unknown\_recipient\_domain,  
> reject\_rbl\_client [zen.spamhaus.org](http://zen.spamhaus.org),  
> reject\_rbl\_client [opm.blitzed.org](http://opm.blitzed.org),  
> reject\_rbl\_client [list.dsbl.org](http://list.dsbl.org),  
> reject\_rbl\_client [sbl.spamhaus.org](http://sbl.spamhaus.org),  
> reject\_rbl\_client [unconfirmed.dsbl.org](http://unconfirmed.dsbl.org),  
> reject\_rbl\_client [dynablock.njabl.org](http://dynablock.njabl.org),  
> reject\_rbl\_client [cbl.abuseat.org](http://cbl.abuseat.org),  
> permit  
> smtpd\_sender\_restrictions =  
> permit\_sasl\_authenticated,  
> permit\_mynetworks,  
> reject\_unknown\_sender\_domain,  
> reject\_unauth\_destination,  
> reject\_unknown\_sender\_domain,  
> reject\_rbl\_client [list.dsbl.org](http://list.dsbl.org),  
> reject\_rbl\_client [sbl.spamhaus.org](http://sbl.spamhaus.org),  
> reject\_rbl\_client [unconfirmed.dsbl.org](http://unconfirmed.dsbl.org),  
> reject\_rbl\_client [dynablock.njabl.org](http://dynablock.njabl.org),  
> reject\_rbl\_client [multihop.dsbl.org](http://multihop.dsbl.org),  
> reject\_rbl\_client [opm.blitzed.org](http://opm.blitzed.org),  
> reject\_rbl\_client [cbl.abuseat.org](http://cbl.abuseat.org),  
> reject\_unauth\_pipelining,  
> permit
> 
> myhostname = huis.selfhost.eu  
> alias\_maps = hash:/etc/aliases  
> alias\_database = hash:/etc/aliases  
> mydestination = huis.selfhost.eu, localhost.selfhost.eu, localhost, $myhostname, localhost.$mydomain  
> mynetworks = 127.0.0.0/8  
> inet\_interfaces = all  
> inet\_protocols = all
> 
> smtp\_sasl\_auth\_enable = yes  
> smtp\_sasl\_password\_maps = hash:/etc/postfix/sasl\_passwd  
> smtp\_sasl\_security\_options = noanonymous  
> relayhost = [[mail.selfhost.de](http://mail.selfhost.de)]
> 
> smtp\_use\_tls = yes  
> smtp\_tls\_loglevel = 1  
> smtp\_tls\_session\_cache\_database = btree:${data\_directory}/smtp\_scache
> 
> virtual\_transport = dovecot  
> dovecot\_destination\_recipient\_limit = 1
> 
> virtual\_mailbox\_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf  
> virtual\_mailbox\_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf  
> virtual\_alias\_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf  
> soft\_bounce = no  
> content\_filter = amavis:[127.0.0.1]:10024  
> receive\_override\_options = no\_address\_mappings
> 
> message\_size\_limit = 104857600  
> compatibility\_level = 2

---

<div class="post-metadata">

**Author:** ![JuergenAuer](https://sea3.discourse-cdn.com/letsencrypt/user_avatar/community.letsencrypt.org/juergenauer/32/26491_2.png) [@JuergenAuer](https://community.letsencrypt.org/u/JuergenAuer)\
**Post date:** [July 3, 2019, 9:50am UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/2 "2019-07-03T09:50:16Z")

</div>

Hi @scitari

> [@scitari](#):
>
> checked dovecot’s 10-ssl.conf

checked your dovecot via OpenSsl:

```nohighlight
G:\OpenSSL-Win64\bin>openssl s_client -crlf -connect huis.selfhost.eu:993
CONNECTED(000001E0)
24584:error:14094410:SSL routines:ssl3_read_bytes:sslv3 alert handshake failure:ssl\record\rec_layer_s3.c:1528:SSL alert number 40
---
no peer certificate available
---
No client certificate CA names sent
---
SSL handshake has read 7 bytes and written 318 bytes
Verification: OK
---
New, (NONE), Cipher is (NONE)
Secure Renegotiation IS NOT supported
Compression: NONE
Expansion: NONE
No ALPN negotiated
Early data was not sent
Verify return code: 0 (ok)
---

```

The handshake doesn't work

> SSL alert number 40

Searching that error there is a Github thread - [sslv3 Alert Handshake Failure (alert number 40) · Issue #7147 · openssl/openssl · GitHub](https://github.com/openssl/openssl/issues/7147)

Looks like your configuration is incomplete because SNI informations are missing.

Rechecked your config:

> [@scitari](#):
>
> ssl\_protocols = TLSv1.2 TLSv1.1 TLSv1  
> ssl\_cert = \</etc/letsencrypt/live/huis.selfhost.eu/fullchain.pem  
> ssl\_key = \</etc/letsencrypt/live/huis.selfhost.eu/privkey.pem

Looks like you need something like

[https://wiki.dovecot.org/SSL/DovecotConfiguration#With\_client\_TLS\_SNI\_.28Server\_Name\_Indication.29\_support](https://wiki.dovecot.org/SSL/DovecotConfiguration#With_client_TLS_SNI_.28Server_Name_Indication.29_support)

```nohighlight
local_name imap.example.org {
  ssl_cert = </etc/ssl/certs/imap.example.org.crt
  ssl_key = </etc/ssl/private/imap.example.org.key
}
local_name imap.example2.org {
  ssl_cert = </etc/ssl/certs/imap.example2.org.crt
  ssl_key = </etc/ssl/private/imap.example2.org.key
}

```

so your server can find the correct certificate.

---

<div class="post-metadata">

**Author:** ![Buffalo](https://sea3.discourse-cdn.com/letsencrypt/user_avatar/community.letsencrypt.org/buffalo/32/28370_2.png) [@Buffalo](https://community.letsencrypt.org/u/Buffalo)\
**Post date:** [July 3, 2019, 9:29pm UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/3 "2019-07-03T21:29:25Z")

</div>

Same thing happened to me when I updated openssl.  
For my setup, this fixed it.

in /etc/dovecot/conf.d/10-ssl.conf  
ssl\_key = \</etc/letsencrypt/live/w5gfe.org/privkey.pem  
ssl\_cert = \</etc/letsencrypt/live/w5gfe.org/fullchain.pem

ssl\_protocols = !TLSv1 !SSLv2 !SSLv3

ssl\_cipher\_list = ALL:!CHACHA20:!DH:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!P  
SK:!RC4:!ADH:!LOW@STRENGTH

---

<div class="post-metadata">

**Author:** ![scitari](https://avatars.discourse-cdn.com/v4/letter/s/a9a28c/32.png) [@scitari](https://community.letsencrypt.org/u/scitari)\
**Post date:** [July 4, 2019, 7:48am UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/4 "2019-07-04T07:48:09Z")

</div>

Hi Buffalo,

Applied, restarted Dovecot, and unfortunately still fails with same error message.

But has been wort a try, thanks a lot  
Chris

---

<div class="post-metadata">

**Author:** ![scitari](https://avatars.discourse-cdn.com/v4/letter/s/a9a28c/32.png) [@scitari](https://community.letsencrypt.org/u/scitari)\
**Post date:** [July 4, 2019, 7:56am UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/5 "2019-07-04T07:56:31Z")

</div>

Hi Jürgen,

OK, that is something new, I didn’t have on my plate so far.

So, shall I add something like …  
local\_name imap.huis-selfhost.eu {  
ssl\_cert = \</etc/letsencrypt/live/huis.selfhost.eu/fullchain.pem  
ssl\_key = \</etc/letsencrypt/live/huis.selfhost.eu/privkey.pem  
}  
to ‘10-ssl.conf’?

I need to admit, that I am not sure if something like ‘imap.huis-selfhost.eu’ is internally properly resolved. Typically I always used ‘huis.selfhost.eu’ also as mailserver name.

Some background, I forgot to mention. The server has worked before, with the setup I have in place, on a previous Ubuntu version; except I had another “home-made” certificate in place. This server was now updated to the latest OS version, including updates of openssl etc., and including the swith to letsencrypt.

Best  
Chris

---

<div class="post-metadata">

**Author:** ![scitari](https://avatars.discourse-cdn.com/v4/letter/s/a9a28c/32.png) [@scitari](https://community.letsencrypt.org/u/scitari)\
**Post date:** [July 4, 2019, 8:31am UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/6 "2019-07-04T08:31:44Z")

</div>

You know what … your suggestions at least activated my creativity again!

And I realized that running good old 'dovecot -n´should also be worth a try again and again.

And by doing that it showed me some issues with conflicting settings in different .conf files which might originate from changes in how settings are applied in previous and latest versions from Dovecot.

Will check and clean that first, and keep you posted on if this might cause the issue.

Chris

---

<div class="post-metadata">

**Author:** ![JuergenAuer](https://sea3.discourse-cdn.com/letsencrypt/user_avatar/community.letsencrypt.org/juergenauer/32/26491_2.png) [@JuergenAuer](https://community.letsencrypt.org/u/JuergenAuer)\
**Post date:** [July 4, 2019, 8:43am UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/7 "2019-07-04T08:43:42Z")

</div>

> [@scitari](#):
>
> I need to admit, that I am not sure if something like ‘imap.huis-selfhost.eu’ is internally properly resolved. Typically I always used ‘huis.selfhost.eu’ also as mailserver name.

Not imap, if you don't use that. Your own server name - `huis.selfhost.eu`.

I'm not so firm with dovecot. But the OpenSsl error says, there is a wrong handshake. One part may be the SNI part.

---

<div class="post-metadata">

**Author:** ![scitari](https://avatars.discourse-cdn.com/v4/letter/s/a9a28c/32.png) [@scitari](https://community.letsencrypt.org/u/scitari)\
**Post date:** [July 4, 2019, 11:33am UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/8 "2019-07-04T11:33:22Z")

</div>

Guys, it works! With Thunderbird as well as with my Smartphone client.

You have no imagination how happy I am. Thanks a lot!

What I did …

1. I cleaned all Dovecot .conf files for duplicated or conflicting settings
2. I applied the suggested changes by Buffalo

I also applied the addition as suggested by Jürgen. But was neither necessary nor did harm, so I commented it out for now.

Don’t forget to check validity with ‘dovecot -n’ and restart Dovecot.

Thanks a lot guys,  
you made not only my day but my quarter

Chris

---

<div class="post-metadata">

**Author:** ![JuergenAuer](https://sea3.discourse-cdn.com/letsencrypt/user_avatar/community.letsencrypt.org/juergenauer/32/26491_2.png) [@JuergenAuer](https://community.letsencrypt.org/u/JuergenAuer)\
**Post date:** [July 4, 2019, 1:44pm UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/9 "2019-07-04T13:44:24Z")

</div>

> [@scitari](#):
>
> Don’t forget to check validity with ‘dovecot -n’ and restart Dovecot.

Thanks sharing that command. Happy to read that it works 👍

---

<div class="post-metadata">

**Author:** ![Buffalo](https://sea3.discourse-cdn.com/letsencrypt/user_avatar/community.letsencrypt.org/buffalo/32/28370_2.png) [@Buffalo](https://community.letsencrypt.org/u/Buffalo)\
**Post date:** [July 4, 2019, 4:22pm UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/10 "2019-07-04T16:22:02Z")

</div>

Good to hear! 73 de Bill W5GFE

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/letsencrypt/original/3X/c/a/ca6c06ea1ea201324bba7048c6841ce60236468d.png) [@system](https://community.letsencrypt.org/u/system)\
**Post date:** [August 3, 2019, 4:22pm UTC](https://community.letsencrypt.org/t/no-shared-cipher/97099/11 "2019-08-03T16:22:08Z")

</div>

Closed on August 3, 2019, 4:22pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
